Ever get tired of those old rubber fuel lines under the hood of your muscle car or hot rod? It’s time for an upgrade. Replace those outdated hoses with a high-performance braided fuel line and instantly improve both the look and function of your vehicle’s fuel system. You’ll be surprised at what a difference the right braided hose can make.
Those old rubber fuel lines were fine for cruising around town but not for the kind of performance you want now. Braided lines are stronger, more durable, and resistant to abrasions and heat. They’ll handle the higher fuel pressures needed for more power without swelling or leaking. Braided lines also look great with their stainless steel outer layer. Pop the hood at your next car show or cruise-in and people will notice the upgrade right away.
You’ve put a lot of time, money and effort into building your dream machine. Now give it the high-performance plumbing it deserves. Make the switch to braided fuel lines and unleash your car’s full potential. Your ride will run better, last longer and turn more heads with this stylish upgrade under the hood. Isn’t it time you step up to braided fuel lines? Your car will thank you for it.
What Is a Braided Fuel Line?
A braided fuel line is a reinforced hose used to carry fuel from your fuel pump to your carburetor or fuel injectors. Unlike a standard rubber hose, a braided fuel line has a stainless steel braided sleeve over the hose, which helps prevent swelling and damage.
Upgrading to a braided fuel line is a great way to improve the performance and reliability of your vehicle. Here are a few of the main benefits:
Prevent Fuel Starvation
The braided sleeve stops the hose from expanding under high pressure, ensuring consistent fuel flow to your engine. This helps prevent fuel starvation, where your engine momentarily loses power due to lack of fuel.
Withstand Higher Pressures
Braided fuel lines can handle higher fuel pressures without bursting, making them ideal for turbocharged or supercharged engines. The stainless steel braid reinforces the hose, increasing its pressure rating.
Braided fuel lines typically last 2-3 times longer than standard rubber hoses. The braided sleeve protects the hose from abrasions, heat, and swelling, extending its lifespan.
Let’s face it, braided fuel lines just look cool. The stainless steel braiding gives your engine bay a high-performance look. If you’re modifying your vehicle for power and appearance, braided fuel lines are a must-have upgrade.
So if you want to improve performance, reliability and the looks of your ride, braided fuel lines are an easy and affordable upgrade that will make a big difference. Your engine will thank you!
Benefits of Installing a Braided Fuel Line
Upgrading your ride with a braided fuel line is one of the easiest ways to improve performance and reliability. Here are a few of the major benefits:
Braided fuel lines are much more durable than standard rubber hoses. The stainless steel braiding protects the inner hose from heat, abrasion, and punctures. This means no more fuel line leaks or breaks, even under high pressure or temperature. For high-performance vehicles, this added durability is essential.
The stainless steel braiding also helps prevent the hose from expanding under pressure, reducing fuel flow restriction. This allows fuel to flow more freely to your engine, increasing horsepower and throttle response. The difference in performance can be quite noticeable.
Braided fuel lines typically last 2-3 times longer than standard hoses. The stainless steel braiding shields the inner hose from environmental damage and wear over time. For a few extra bucks upfront, you get a fuel line that will likely outlast your vehicle.
Braided fuel lines come in a variety of lengths, diameters and end fittings to suit your specific vehicle and needs. You have options for hose material, braid type, and fitting angle. This makes it easy to find a high-quality braided fuel line that bolts directly into place for a clean, professional looking installation.
With benefits like increased durability and performance, a longer lifespan, and custom options, installing braided fuel lines is well worth the investment for your high-performance ride. Your engine will thank you!
What is catch can kit?
A catch can kit, also known as an oil catch can kit, is an aftermarket automotive accessory designed to intercept and collect oil vapor and other contaminants from the crankcase ventilation system before they can be recirculated back into the intake manifold.
Here’s how it works: Crankcase Ventilation System: In an internal combustion engine, there are small amounts of blow-by gases that escape past the piston rings and enter the crankcase. These gases can contain oil mist and other contaminants.
Recirculation: Traditionally, these blow-by gases are vented back into the intake system. This is done to re-burn unburned fuel and reduce emissions.
Issues with Direct Recirculation: However, this process can have downsides. It can lead to a build-up of oil deposits in the intake manifold and other parts of the engine. Over time, this can lead to reduced performance and efficiency.
Catch Can Installation: This is where a catch can comes in. It’s installed in-line with the crankcase ventilation system. As the blow-by gases pass through the catch can, any oil vapor or contaminants are separated and collected in the can.
Cleaner Intake: The clean air, now free of oil mist and contaminants, continues on to the intake manifold. This can help reduce the build-up of deposits, potentially leading to improved performance and efficiency.
Maintenance: Periodically, the catch can must be emptied of the collected contaminants. This is a straightforward process and helps maintain the effectiveness of the system.
A catch can kit typically includes the catch can itself, hoses, fittings, and mounting hardware. It may also come with specific instructions for installation. Catch cans are often used in performance-oriented or modified vehicles, but they can also be beneficial in regular vehicles for maintaining a cleaner intake system and potentially increasing longevity.
Keep in mind that if you’re considering installing a catch can kit, it’s a good idea to consult with a knowledgeable mechanic or refer to the manufacturer’s instructions to ensure it’s installed correctly for your specific vehicle.
How to Choose the Best Braided Fuel Line for Your Vehicle
Upgrading your vehicle’s fuel system with a high-performance braided fuel line is a great way to improve its power and efficiency. When choosing a braided fuel line, consider these factors:
Fuel Type – Make sure the line you choose is compatible with the type of fuel your vehicle uses, whether it’s gasoline, diesel, ethanol or methanol. Stainless steel braided lines can handle most fuel types, but double check to be certain.
Diameter – The diameter of the fuel line impacts how much fuel can flow to your engine. For most applications, -6 or -8 size lines work well for supplying adequate fuel flow. Larger engines may require -10 size or bigger.
Length – Measure the length of your existing fuel line to determine what length replacement line you need. It’s best to get a line that’s slightly longer rather than shorter to allow for easy installation and positioning.
End Fittings – Consider the end fittings, also known as AN (Army/Navy) fittings, required to connect the fuel line to your vehicle’s fuel rails and fuel pump. The most common types are AN-6 and AN-8, which simply screw on. Make sure the fittings on the new braided line match your vehicle’s requirements.
Coating – Some braided fuel lines have an additional coating, like nylon or PTFE, that helps prevent abrasion and reduce noise caused by the line vibrating. A coated braided line may be a good choice if the fuel line runs near moving parts.
Installation – Braided fuel lines are designed to be direct replacements for your factory fuel line. However, for high-performance applications, you may need to install additional fittings to adapt the new line to your fuel system. Consider whether you have the skills and tools to install the new braided line yourself or if hiring a mechanic is a better option.
Choosing a high-quality braided fuel line designed for your specific vehicle and performance needs will help ensure maximum power and efficiency. With the proper selection and installation, a braided fuel line upgrade can provide years of enhanced performance.
So there you have it, the benefits of upgrading to braided fuel lines are clear. Smooth-as-silk fuel delivery, increased horsepower, and peace of mind that your fuel system won’t let you down when you need it most. The minimal upfront investment will pay off every time you hit the road or track. What are you waiting for? Give your engine the high-performance components it deserves and unleash the potential that’s been hiding under the hood. Your ride will instantly feel reinvigorated and ready to roar. Make the upgrade – you owe it to yourself and your set of wheels. The open road is calling, are you going to keep it waiting any longer?